This is very common problem. Hüper Optik™ technicians are trained to ensure that your window tint is perfectly installed from the moment you pick up your vehicle. Even still, there may be a bit of haze on your windows for the first few days.
This is completely normal and temporary. For the first few days after your windows are tinted they might appear cloudy, hazy, and you may see little water pockets forming underneath the film.
When windows are tinted, the squeegee can only remove a certain amount of the water from between the film and the glass. As the film dries, the remaining water may form little bubbles. Window film is a porous material that allows water to evaporate, so these water pockets will simply evaporate and go away by themselves as the film fully cures to the glass. The amount of time before your new tint will be totally dry is determined by the skill of the installer, the amount of sunlight it gets, and the type of film chosen. If it’s cloudy and overcast outside, it will take longer, if it’s hot and sunny, then the film dries very quickly. With a typical installation this could take anywhere from 3 days to one week.
* Avoid any extra stress on your windows during the curing period, this includes rolling the windows up and down. You are best to leave them closed until the films are fully cured.